What if you witness a noisy garage door at the start of your day – it’s an instant mood killer, isn’t it? Garage doors start to make noise with time as they move multiple times in a day. The only solution to keep them quiet and increase their lifespan is to lubricate them periodically. It’s said that a garage door that is lubricated every six months has robust durability. As the door’s range of motion gets free, it becomes easier for the opener to open and close the door. While a professional garage door repair company can do the job of lubrication for you, there’s no rocket-science in doing it yourself sometimes. Lubrication is easy, however, there are some tips to keep it right. See here!
What is the pre-lubrication checklist?
Completing the pre-lubrication tips is important prior to lubricating your garage door. Here’s what you need to do:
- Screw-in all the parts of your garage door: Snug fits all the nuts and bolts but doesn’t tighten them rigidly. Worn parts should be checked as well and if they are there, make sure you replace them before lubrication.
- Rollers’ inspection: Unsealed bearings on rollers is very common. Because of this, they easily get all the dirt and crack over time. Rollers wobble around the track when they break down and create noise.
- Remove worn hinges: It’s important to check hinges before you do the lubrication as worn hinges generate noise and make the door bind at each section whenever it opens.
- Snug up the garage door opener chain: A loose chain makes the door jerk around hence it should be tightened well.
As you finish these tasks, you are good to go with lubricating the garage door.
How to lubricate the garage door?
It’s important to be thorough in lubricating all the parts of the garage door. Here’s the step-by-step guide you can follow:
- Turn off the opener’s power and close the garage door.
- The next step is to clean the tracks. You can remove all the dirt with a clean damp cloth. Lubricants must not be used inside the tracks as this makes the rollers move harder and you have to put much effort into moving the opener.
- Now open the door and start lubricating the hinges. All the hinges that are meeting the bend of the track must be lubricated.
- Rollers include tiny ball bearings inside them. Make sure you lubricate both of them. Excessive lubricant should be wiped off or else this will imbalance your garage door. Please note that if you have nylon rollers, do not lubricate them.
- There are springs and bearing plates on the top of your garage door. Lubricate them properly. Keep closing and opening the door while you apply the lubricant as this distributes the grease evenly.
- Do not forget to lubricate the armbar and the lock of the garage door.
- The top of the rail should be lubricated well. There’s no need to put the grease on the chain as they are naturally lubricated.
Some general tips to follow
As said, the lubrication of all the moving parts is required to be done every six months. This not only keeps the garage door silent but escalates the life of the door too. Harsh weather conditions make it more important to grease the parts frequently. For say, if you’re living near a beach or on a hill station, keep lubricating the garage door in 3-4 months. Use all-weather products as low-temperatures make the grease thick and viscous. Garage door springs become brittle in cold weather hence timely lubrication is a must.
A garage door repair company would help
Is this all a tricky task for you? Call a garage door repair company near you and get your garage door lubricated. At the end of the day, the important thing is to lubricate the parts on time – doesn’t matter who’s doing so. Garage Door Repairs Houston is there for all your garage door repair needs. Get an expert’s help for all your queries.